SA 830 Dł
| SA 830 Dł 3D technology Wheel Aligner. Simple targets (reference stickers applied on them) are mounted on the wheels; measuring system is positioned in the central part of the lift or in the ground when working in the pit. The sensor use 2 camera as reference system to allow to be always calibrated (no periodic calibration is needed). SA 830 Dł is the only stereoscopic wheel aligner, 2 cameras per wheel (total 8 cameras) measures and grants high performances in terms of accuracy and speed/velocity, the system is equipped with rolling run-out function (it can be done driving the car in position) and the program maintain the easy function of the traditional systems. All this allow a complete check in few minutes. The particular shape and position of the sensors avoid any "overall dimensions systems" installation and allow the use also in small space workshop. For van and light truck are available (as optional accessory) additional boards for wheel base above 340 mm. |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Technical features | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - PC with 2.0 GHz microprocessor - Windows XP operating system - 19" LCD monitor - Choice of language (18 options) - Client card index system with automatic search - Illimited capacity of memory - Annual updates of manufacturers' data. - A series of diagrams to assist operators during preparation and adjustment of the vehicle - Camber adjustment with the vehicle raised - Constant monitoring of the accuracy of the system during measuring - Automatic error signals - Readings for all the figures of the forward and rear axles - Target data with 48 car manufacturers and more than 12.000 veichles | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SICAM srl soc. unip. A Bosch Group Company
Via Della Costituzione, 49 - 42015 Correggio (RE) Italy - tel.+39 0522 643311 fax +39 0522 637760